Power Range
20 - 3000 kVA

Fuel Types
Diesel

Frequencies
50Hz

Build Types
Silent & Open

Warranty
Brand Specific

What is a Genset?

Also known as a generator set, a genset is a combination of equipment that converts fuel into electrical energy. In most cases, the term "genset" used to refer to the combination of a combustion engine (typically diesel) and electrical generator (alternator) that work in partnership to generate a single source of power.


What is a Genset User For?

Primarily, gensets are used on sites that aren't connected to the power grid, acting as a self-sufficient power supply. They may also be used as an emergency source of power when the connection to the grid fails. Finally, they can be used to produce power during peak hours. When your energy demands are at their highest, you can deploy a genset to reduce the costs of getting all your supply from a utility company.

What Elements Make Up a Genset?

A genset produces power through its engine and alternator. They can use a variety of fuel sources, including diesel, gasoline/petrol, biogas, natural gas, and more. The fuel is stored in a fuel tank, burned in the engine, and converted by the alternator.

The addition of an Automatic Transfer Switch helps genset owners control when the genset starts to supply power while the control panel acts to monitor, regulate, and protect the genset.

Other components include a soundproof & weatherproof canopy, often made of steel or aluminium. Treated with anti-corrosion elements, it keeps the airflow that cools the engine consistent and also reduces the amount of noise produced by the genset.

Finally, the baseframe (or skid) is a solid frame often made of steel that reduces vibrations that could cause damage to the genset and may be used to elevate the generator.

How Do Gensets Work?
How Are Gensets Used?

The mechanics of a genset are usually the same, differing sometimes based on the fuel source used to provide the heat. However, there is a range of applications for a genset, as described below:

  • Continuous load: When a genset is used as a primary source of power for sites that are off-the-grid. Often used in remote location applications like mining, construction, and on ships. In some cases, it is even cheaper to use a continuous load genset than to use power from a utility company.
  • Backup generators: In the event of a power failure, the Automatic Transfer Switch can kick the genset into life to make sure that the site stays operational. Often used in hospitals, schools, and comms facilities where a power cut may be a major source of downtime or even a life-threatening risk.
  • Peak shaving: When electricity demands are the highest, gensets can be used to provide some or all of the power required. Some companies even use peak shaving to negotiate lower rates from utility providers.
  • Mobile/portable use: In some cases, smaller gensets can be used to provide portable power on a mobile site, like an RV or a boat. Gensets designed for portable use tend to be smaller and have a lower output as a result.

Finding the application you need need can be a crucial step in choosing the right genset for your business or site.

Could You Benefit from Installing a Genset?

A genset can help provide the supply of power you need for your off-grid site or act as an emergency backup and even a cost-cutting measure. Finding the right fuel type, fuel capacity, and arrangement depends on your exact needs, but there is no denying the utility and versatility of such a device on your site.

Can't Find the Genset You Need?

If you can't find the ideal genset for your needs on this page, get in touch and we'll source your perfect generator direct from the manufacturer. Our expert customer service team is happy to discuss our selection of generators with you and help find the perfect solution for your prime or standby generation requirements. They are available Monday to Friday, 9am to 5pm (GMT) via phone or email.

For more information about our full range of gensets

Get in touch to speak with our experts